Sound Adjustment
1
Press <SOUND> to display the
[Sound] menu.
Sound
Default
Default
Output select
Sound mode
Bass
0
Mid
0
Treble
0
Balance
0
Surround
4 Input multi display audio select
2
Select the item to adjust with
●
Menu that cannot be adjusted is greyed out.
Adjustable menu changes depending on signal,
input and menu setting.
3
Select the desired level with
listening to the sound.
4
Press <SOUND> to exit from adjust
mode.
■
To return to the previous screen
Press <RETURN>.
■
To reset to defaults
Press <DEFAULT> while the menu is displayed, or
press <ENTER> when [Default] is selected, then the
settings will be set to factory settings.
[Output select]
Select the audio output.
[SPEAKERS]: Internal speakers
[AUDIO OUT]: AUDIO OUT
●
●
[Sound mode]
[Normal]:
[Dynamic]:
[Clear]:
[Bass]
Adjusts low pitch sounds.
[Mid]
Adjusts normal sounds.
[Treble]
Adjusts high pitch sounds.
SPEAKERS
Normal
Off
Off
.
by
terminal output
When [AUDIO OUT] is
selected, only [Balance] can
be selected. The other menus
are greyed out and cannot be
selected.
Audio volume and [Balance]
settings are memorized
separately for each output.
Emits the original
sound.
Accentuates sharp
sound.
Attenuates human
voice.
[Balance]
Adjusts left and right volumes.
[Surround]
[Off]:
[On]:
[4 Input multi
Sets the sound for 4 Input multi
display audio
display.
select]
[Upper right]
- [Lower left]:
[Off]:
Note
●
[Bass], [Mid], [Treble] and [Surround] settings are
memorised separately for [Normal], [Dynamic] and
[Clear] in [Sound mode].
Normal sound
Surround sound
The input sound
of the selected
screen will be
output.
The sound will
not be output
during 4 Input
multi display.
English
35