Restricting Rds Region (Region Restrict Function); Auto Tp Seek; Monaural Reception; Auxiliary Input Display Setting & Disc Naming - Kenwood KDC-W7031 Instruction Manual

Menu system
Restricting RDS Region (Region
Restrict Function)
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display Setting
"Regional : ON" The Region Restrict Function is ON.
"Regional : OFF" The Region Restrict Function is OFF.
• Without restricting AF function to the specified region
and network, it sets up to search the station with
good reception in the same RDS network.

Auto TP Seek

When the TI function is ON and poor reception
conditions are experienced when listening to
a traffic information station, another traffic
information station with better reception will be
searched for automatically.
Display Setting
"Auto TP Seek : ON" The Auto TP Seek Function is ON.
"Auto TP Seek : OFF" The Auto TP Seek Function is OFF.
In FM reception

Monaural Reception

Noise can be reduced when stereo broadcasts are
received as monaural.
Display Setting
"MONO : OFF" The monaural reception is OFF.
"MONO : ON" The monaural reception is ON.
40
|
English
Auxiliary Input Display Setting &
Disc Naming
For selecting the display when switched to
Auxiliary input source. For the Disc Naming refer
to the <Disc Naming (DNPS)> (page 33).
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"*/"AUX EXT" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Auxiliary input display setting mode
Push the Control knob to [FM] or [AM].
Select the "Name Set" display.
4
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
5
Select the Auxiliary input display
Push the Control knob to [4] or [¢].
Each time the button is pressed, the display
switches as shown below.
• "AUX"*/"AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
6
Exit Menu mode
Press the [MENU] button.
• * Function of the KDC-W8531/W7531
• When operation stops for 10 seconds, the name at
that time is registered, and the Auxiliary input display
setting mode closes.
• The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.