Field
You can use one of the following there methods to use WPS authentication:
Press the WPS button on the side panel for 3 seconds.
In the WIRELESS WPS page, click PBC. It has the same function of the
WPS button on the side panel. This is an optional method on wireless
clients.
Note:
You need a Registrar when using the PBC method in a special case in
which the PIN is all zeros.
3.3.1.4
WDS Settings
54B
In the ADVANCED WIRELESS page, click WDS Settings. The WIRELESS
WDS page as shown in the following figure appears:
The Wireless repeater function can make the WLAN signal cover more area. Fill
the blanks and then Apply.
access point or a wireless router.
43
Description