Front Continued - Sony Ericsson D750i Working Instructions

D750i, K758c, W800 and W700 Working Instructions - Mechanical

Front continued

ASSEMBLY
Remove the inside protection (new front only)!
Do not to scratch the glass with the tweezers!
Use air blow equipment to clean the front glass
Make sure the keyboard is in its proper position!
Place the front at the top over the frame.
Press the front forward until it snaps onto the top hook.
Then fold down the front against the frame and start to
snap them together.
Gently press with your fingers around the front.
Make sure that there are no gaps around the phone!
If there still is a gap somewhere, gently press the two
halfs together with your fingers!
Apply 18 Ncm torque for the screws using
NTZ 112 288 (torx bit no.6)!
Tighten two new screws in the frame cavities.
Follow the Assembly instructions of section 3.2 – 3.1
3/00021-1/FEA 209 544/95 G 12(43)
©
Company Internal Sony Ericsson Mobile Communications AB