Plastic Carrier Continued - Sony Ericsson D750i Working Instructions

D750i, K758c, W800 and W700 Working Instructions - Mechanical

Plastic Carrier continued

ASSEMBLY
Remove the protection tape (1), (new plastic carrier only).
Otherwise assemble a new adhesive on the plastic carrier.
Assemble the keyfoil and metalplate to the plastic carrier.
Gently bend the keyfoil flexfilm (2) underneath the
plastic carrier to prevent it from getting squeezed!
Be careful not to damage the keyfoil flexfilm (3) when
sliding the plastic carrier into the frame!
Press and snap the plastic carrier onto the frame.
Be careful not to damage the keyfoil flexfilm!
Make sure the board-to-board connector on the PBA has
not become broken!
Gently flip up the keyfoil and metal plate to the right (4).
Connect the keyfoil flexfilm board-to-board connector to
the PBA (5) with your fingers or with the flexfilm assembly
tool.
Note!
If there is a problem with the camera, place a conductive
pad in the marked hole (6)
3/00021-1/FEA 209 544/95 G 15(43)
©
Company Internal Sony Ericsson Mobile Communications AB