Antenna Cover Continued - Sony Ericsson D750i Working Instructions

D750i, K758c, W800 and W700 Working Instructions - Mechanical

Antenna Cover continued

Be careful not to damage the antenna cover and the
frame as they become separated!
Gently lift the cover in the loose end (6) and then
slide/wiggle it forward in the arrow direction (7) until it can
be removed.
ASSEMBLY
The camera lid has to be open when the antenna cover is
assembled to the frame!
Place the antenna cover over the frame starting at the top
and then snap them together.
Check that the antenna cover is properly assembled,
i.e. no gaps along the sides!
If there still is a gap somewhere, gently press the two
halfs together with your fingers!
Close the camera lid.
±
Apply 9 Ncm ( 2 Ncm) torque for the screws by using
the bit NTZ 112 1052 (Phillips bit)!
Tighten two new screws through the antenna cover into
the frame.
Follow the Assembly instructions of section 3.1
3/00021-1/FEA 209 544/95 G 9(43)
©
Company Internal Sony Ericsson Mobile Communications AB