Programming Recordings With Video Plus; Timer Recording From Sat - Panasonic DMR-ES20DEB Operating Instructions Manual

TIMER-controlled recordings
VIDEO Plus+
8 5 3 4
Enter PlusCode Number by using 0-9 keys.
TIMER
ENTER
RECORDING
RETURN
Name Date
2 BBC2 18/11 THU
BBC2
Sports News
Press ENTER to store the programme.
ENTER
RETURN
TIMER
RECORDING
Nr Name Datum No. Name Date
Start Start
01 BBC2 18/11 THU 15:00
New Timer Programme
[Chan. Name] BBC2
[Prog. Name] Sports News
ENTER
RETURN
VIDEO Plus+
8 5 3 4 2
Enter PlusCode Number by using 0-9 keys.
ENTER
RETURN
TIMER
ENTER
RECORDING
RETURN
Name Date Start
----- --/-- ---- 15:00
----
Invalid Entry
ENTER
RETURN
TIMER
ENTER
RECORDING
RETURN
Name Date Start
AV2 26/10 TUE 15:00
AV2
Press ENTER to store the programme.
ENTER
RETURN
Downloaded From Disc-Player.com Panasonic Manuals
RAM -R
-RW V +R
Remain 1:58 SP
Insert a disc.
12:09:37 18/ 11 THU
VIDEO Plus+ is not supported for digital channels.
2
VIDEO Plus+

Programming recordings with VIDEO Plus+

By entering a VIDEO Plus+ number, the TIMER-controlled recording is easy to set.
The appropriate codes can be found in newspapers and TV guides.
Remain 1:58 SP
Nr.
0 9
12:09:37 18/ 11 THU
Start Stop Mode PDC
Press VIDEO Plus+.
SP ON
15:00 16:00
Enter the VIDEO Plus+ number using the numeric buttons.
Programme Name
Use
Confirm the VIDEO Plus+ number with ENTER.
CANCEL No.
0 9
In the TIMER RECORDING screen, check the start and end time and the PDC
signal.
If [ ---] is displayed under Name, use
Remain 1:58 SP
12:09:37 18/11 THU
VPS STTL Disc
Stop Stop Mode
Mode
Use
space
PDC PDC
16:00 SP ON OK
If you selected PDC [ON], recording mode FR is not possible.
If you want to enter the programme name, use
and confirm with ENTER.
Once you have performed all changes, save the programme with ENTER.
To continue programming, select [New Timer Programme].
CANCEL
Press
The
To cancel or pause the recording, press
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.
TIMER recording from Sat with VIDEO Plus+
VIDEO Plus+ Codes for Satellite Receivers
This DVD Recorder is not designed to control (switch on or change channel) your satellite
receiver, however, it can be taught to recognise VIDEO Plus+ Codes for Satellite stations.
The Satellite Receiver must be switched on and the correct station selected.
Remain 1:58 SP
12:09:37 18/ 11 THU
Some receivers have their own timer facility for this purpose.
Please refer to your Satellite Receiver instructions for use of such timer facilities.
For your DVD Recorder to recognise the VIDEO Plus+ Codes for each satellite station, you
must teach your DVD Recorder which channel or AV input to record from for the first time.
Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will appear in the
channel position indicating that the DVD Recorder does not know which channel position
No.
0 9
to set.
Once you have set the channel/AV input the DVD Recorder will remember it whenever you
use a VIDEO Plus+ Code for the station again.
VIDEO Plus+
Press the VIDEO Plus+ button.
Remain 1:58 SP
Nr. 0 9
12:09:37 18/ 11 THU
Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,
e.g. Sky 1 using the Numeric buttons. Press
Stop Mode PDC
SP -----
15:00
Press the ENTER button. [ - - ] will appear instead of a channel number/AV input.
Programme Name
Press the CH button to select the channel or AV input that is to be used for recording
from the satellite channel.
CANCEL No. 0 9
Press the ENTER button to memorise the setting. The DVD Recorder will now
automatically set the programme position or AV input correctly when a VIDEO Plus+
recording is set for this satellite station in the future.
Remain 1:58 SP
Press
Nr.
0 9
12:09:37 18/ 11 THU
CANCEL/RESET
Stop Mode PDC
longer needed.
16:00 SP ON
Repeat the steps above until you have set and deleted dummy timer recordings for
Programme Name
each of the satellite stations that you will make VIDEO Plus+ recordings from.
Press RETURN when you have finished.
CANCEL No.
0 9
( ) You can programme up to 16 programmes per month in advance.
to delete a number.
, to select the recording mode. (XP, SP, LP, EP, FR)
TIMER to switch the unit to TIMER standby mode.
symbol lights up in the unit display.
to select the programme that you have just set. Now press the
button to delete it from the timer recording list. It is no
to select the desired programme position.
to select [Programme Name]
TIMER again.
to correct any mistakes.
28
34
31