Timer Recording; Using Video Plus+ System To Make Timer Recordings - Panasonic DMR-EH50 Operating Instructions Manual

Timer recording

Numbered
buttons
¢ CANCEL
PROG/CHECK
3,4,2,1
ENTER
EXT LINK
REC MODE
[HDD] [RAM] [-R] [-RW‹V›] [+R]
≥[-R] [-RW‹V›] [+R] When recording bilingual broadcasts, only the
audio selected in "Bilingual Audio Selection" (
("M 1" or "M 2").
≥[HDD] If you set "Rec for High Speed dubbing" to "On" before
recording to the HDD, you can later high speed transfer (dub) the
programme to DVD-R, DVD-RW(DVD-Video format) and +R.
Before recording
≥Refer to the "Using DVD-R, DVD-RW and +R on this unit" for more
information ( 7).
≥See also the notes "Before recording" (
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( 24).
≥Make sure that the clock settings are correct (
RQT8033
28
HDD DVD SD
DRIVE
OPEN/CLOSE
SELECT
∫
DVD
TV TV
Í
Í
CH CH VOLUME VOLUME
DIRECT TV REC DIRECT TV REC
AV AV
HDD, DVD
DVD DVD SD SD
HDD HDD
2 3
1
CH CH
4 5 6
VIDEO Plus+ VIDEO Plus+
7 8 9 VIDEO Plus+
CANCEL CANCEL INPUT SELECT INPUT SELECT
MANUAL SKIP MANUAL SKIP
0
SKIP SKIP SLOW/SEARCH SLOW/SEARCH
PAUSE PAUSE PLAY/x1.3
STOP STOP
ENTER ENTER
SUB MENU SUB MENU RETURN RETURN
CREATE CREATE
AUDIO AUDIO STATUS STATUS ERASE ERASE
CHAPTER CHAPTER
A
B C
REC REC REC MODE EXT LINK REC MODE EXT LINK TIMER TIMER
F TIMER
DVD/TV DVD/TV
58) is recorded
25).
61).
Using VIDEO Plus+ system to make
timer recordings
REC
/k1.3 1.3
Entering PlusCode numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
≥Using PlusCode numbers for Satellite stations or Digital terrestrial
stations
Set this unit to recognise PlusCode numbers for Satellite stations or
Digital terrestrial stations before you start the following operations
( 21, VIDEO Plus+ system for Satellite/Digital terrestrial stations).
≥You can enter up to 32 programmes up to a month in advance.
1
Press [VIDEO Plus+].
VIDEO Plus +
Enter PlusCode Number by using 0-9 keys.
2
Press the numbered buttons to enter
the PlusCode number.
Press [2] to move back to correct a digit.
3
Press [ENTER].
TIMER
RECORDING
Name
15/ 7 TUE
≥Confirm the programme and make corrections if necessary
using [3, 4, 2, 1] (
≥When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
≥You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" (
≥You can also press [REC MODE] to change the recording
mode.
≥PDC (
ON!)OFF (– – –)
≥RENEW (Auto Renewal Recording) [HDD] (
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press
[ENTER] (
4
Press [ENTER].
The settings are stored.
TIMER
RECORDING
No. Name
01
AV2
Repeat steps 1–4 to programme other recordings.
5
Press [F TIMER].
The unit turns off and "F" lights on the unit's display to
indicate timer recording standby has been activated.
≥If you turn on the unit, a
message screen appears.
Recording is not possible
while timer recording is in standby. [Playback is possible
however you cannot play a title recorded using a different
encoding system (PAL or NTSC) from that of the TV system
currently selected on the unit.]
Remain HDD 30:24 SP DVD 1:58 SP
12:53:00 15/ 7 TUE
Remain HDD 30:24 SP DVD 1:58 SP
12:54:00 15/ 7 TUE
HDD
Date Start Stop Mode
DVD
PDC
19:00 20:00 HDD SP OFF
Programme Name
30, step 3).
29, Relief Recording).
29)
55, Entering text).
1:58 SP
Remain HDD 30:24 SP DVD
12:56:00 15/ 7 TUE
HDD Disc
Date Start Stop Mode PDC space
DVD Check to make sure "OK"
15/ 7 TUE 19:00 20:00 SP OFF OK
New Timer Programme
is displayed (
Timer standby is active. Playback is possible.
30)
31).