Panasonic DMR-ES20DEB Operating Instructions Manual page 7

Remote control
30°
SETUP
Remote Control
Clock
Owner ID
Tuning Quick Start
Disc
System Update
Picture
Shipping Condition
Sound
Default Settings
Display
Connection
TAB
Others
SELECT
TAB
SELECT
RETURN
ENTER
RETURN
Downloaded From Disc-Player.com Panasonic Manuals
Point the remote control at the unit's sensor. Avoid obstacles in the path of the
transmission. The maximum range of the remote control is 7 m directly in front of the unit.
Keep the transmission window and the unit sensor clean. The procedure can be impaired
by direct sunlight or doors of glass cabinets.
Child lock
You can lock the buttons of the unit and the remote control.
Press and hold RETURN and ENTER until
7m
The unit is now locked.
In order to unlock the child lock, repeat the procedure until
30°
Operating a television set
Remote control
signal sensor
Change the remote control code to operate your television set.
Press and hold the TV on and off switch button.
Enter the two-digit code for your television set.
The input must be repeated after batteries are changed.
Trademark
Panasonic
AIWA
AKAI
BLAUPUNKT
BRANDT
BUSH
CURTIS
DESMET
DUAL
ELEMIS
FERGUSON
Some television models of the brands listed above, (e.g. older Panasonic units), cannot
be operated using the remote control.
Switching to AV input on your Panasonic television set
Press AV. Each press of the button switches between TV reception and AV input.
If you use another Panasonic device at the same location, change the mode of the
remote control so that you can operate the units independently of each other.
Setting the remote control
Setting the remote control mode for unit.
Press FUNCTIONS in stop mode.
DVD 1
Use
Use
On
Use
Use
Accept the desired mode on the remote control.
Remote Control
SELECT
Automatisch
DVD 1
RETURN Aus
Press and hold the
DVD 2
Deutsch
RETURN enter the number that corresponds to the selected mode (1, 2 or 3).
DVD 3
Press RETURN to exit the menu.
If the mode of the remote control does not correspond with that of the unit,
[REMOTE DVD 1 / 2 / 3] will appear on the unit display.
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
If you want to operate two units independently of each other with the same remote
control, then change the mode of the remote control.
The input must be repeated after batteries are changed.
Code Trademark Code
01-04,45 GOLDSTAR/LG
35 GOODMANS 05,06,31
27,30 GRUNDIG
09 HITACHI 22,23,31,40-42
10,15 INNO HIT
05,06 IRRADIO
31 ITT
05,31,33 JVC 17,39
05,06 LOEWE
31 METZ 28,31
10 MITSUBISHI 06,19,20
to select [To Others] and confirm with ENTER.
to select SETUP and confirm with ENTER.
to select [Others], to select [Remote Control] and confirm with ENTER.
to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.
ENTER button for approx. 2 seconds and, at the same time,
X HOLD
appears in the display.
X HOLD
Trademark Code Trademark
31 MIVAR 24 SALORA
NEC 36 SAMSUNG
09 NOKIA 25-27 SANSUI
NORDMENDE 10 SANYO
SBR
34 ORION 37
SCHNEIDER 05,06,29-31
30 PHILIPS 05,06
SELECO
25 PHONOLA 31,33
SHARP
PIONEER 38 SIEMENS
SINUDYNE
07 PYE 05,06
SONY
RADIOLA 05,06
TELEFUNKEN
SABA 10
THOMSON
disappears.
Code
26
31,32,43
05,31,33
21
06
06,25
18
09
05,06,33
08
10-14
10,15,44
7