Table of Contents
Advertisement
Timer Recording from Sat with VIDEO Plus+
VIDEO Plus+ Codes for satellite receivers
This DVD Recorder is not designed to control (switch on or change channel) your satellite receiver. However, it can be taught to
recognize VIDEO Plus+ Codes for satellite stations. The satellite receiver must be switched on and the correct station selected.
Some receivers have their own timer facility for this purpose.
Please refer to your satellite receiver instructions for use of such timer facilities.
For your DVD Recorder to recognize the VIDEO Plus+ Codes for each satellite station, you must teach your DVD Recorder
which channel or AV input to record from for the first time. Otherwise when setting a VIDEO Plus+ recording, the [--] symbol will
appear in the channel position indicating that the DVD Recorder does not know which channel position to set. Once you have
set the channel/AV input the DVD Recorder will remember it whenever you use a VIDEO Plus+ Code for the station again.
Remain
HDD 36:40 SP
TIMER
RECORDING
HDD
No.
Name
Date
Start Stop
DVD
01 AV2
6/ 3 THU 17:00 17:15 HDD SP
02 AV2
6/ 3 THU 20:45 21:30 HDD SP
New Timer Programme
[Chan. Name] BBC 2W
ENTER
S
SUB MENU
RETURN
Symbols
The title is currently being recorded.
Shows a Timer programming.
A daily or weekly Timer Recording was stopped.
The icon disappears when next Timer Recording starts.
W
The title overlaps other recordings.
F
HDD/DVD was full. The title could not be recorded.
The programme cannot be played back due to damaged
data or cannot be recorded for another reason.
The title is write protected.
The programme was copy-protected so that the title
could not be recorded.
The title was transferred from DVD to HDD.
Title with restriction for one-time copying.
22
VIDEO Plus+
DVD 1:30 SP
9:40:23 6/ 3 THU
Enter a VIDEO Plus+ Code from a satellite TV Guide for a satellite channel,
Drive
STTL
Mode
e.g. Sky 1 using the numeric buttons. Press
space
--- OK
Press the ENTER button. [--] will appear instead of a channel number/AV input.
--- OK
Press the CH button to select the channel or AV input that is to be used for
recording from the satellite channel.
Press the ENTER button to memorize the setting. The DVD Recorder will now
automatically set the programme position or AV input correctly when a
VIDEO Plus+ recording is set for this satellite station in the future.
Press
Delete
Timer Off
to delete it from the Timer Recording list. It is no longer needed.
Repeat the steps above until you have set and deleted dummy Timer Recordings
for each of the satellite stations that you will make VIDEO Plus+ recordings from.
Press RETURN when you have finished.
Press the VIDEO Plus+ button.
to select the programme that you have just set. Now press the
HDD
The title was recorded on HDD.
The title was recorded on DVD.
DVD
The title is automatically renewed.
The title is selected.
Titles and playback lists which can be copied on a
DVD-R etc. in the high speed mode, but not on +R, +R
DL, and +RW.
Titles and playback lists which can be copied on a
DVD-R etc. in the high speed mode.
The title is provided for one-time copying and will be
deleted after it is copied.
Titles or playlists with pictures (pictures cannot be
copied).
The title or the playlist was recorded with a TV
NTSC
system other than that currently set in the unit.
Titles and playlists with these markings possibly
cannot be played back. Switch your TV system
PAL
to playback these titles/playlists.
To Others
VIDEO Plus+ Record
to correct any mistakes.
button
Advertisement
Table of Contents
