Restart The Computer - Panasonic CF-53 Series Operating Instructions Manual

First-time Operation
NOTE
l PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They
are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
(è Reference Manual "Checking the Computer's Usage Status")
16
4 Setup Windows.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the keyboard or touch pad,
and wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for a
while, but this is not a malfunction. Wait for a moment until the Windows setup
screen appears.
l During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
l Setup of Windows will take approximately
20 minutes. Go to the next step, confirming each message on the display.
l You can set the Wireless Network after the setup of Windows is complete.
If "Choose a network" is displayed, you can select "Connect to a
wireless network later".
"Join a wireless network" screen may not appear.
CAUTION
l You can change the user name, password, image and security setting after
setup of Windows.
l Do not use the following words and characters for user name: CON, PRN, AUX,
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if
you create a user name (account name) that includes the "@" mark, a pass-
word will be requested at the log-on screen, even if no password has been set.
If you try to log on without entering a password, "The user name or password
is incorrect." may be displayed and you will not be able to
log on to Windows (è page 28).
5

Restart the computer.

A Shut down the computer.
1. Display "Charm" and click
2. Click [Power] - [Restart].
Click (Start) -
6 Create the recovery disc.
If the recovery partition of the hard disk is damaged or have some problems, you
can use a recovery disc to install the OS and restore its factory default condition.
We recommend creating a recovery disc before you begin using the computer.
Refer to è Reference Manual "Recovery Disc Creation Utility" about creating
the disc.
has turned off.
.
- [Restart].
5 minutes /
sign in /