Wow Control - Kenwood KDC-PSW9531 Instruction Manual

• To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 13).
6
Exit Equalizer Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.

WOW Control

1
Select the source to adjust
Press the [SRC] button.
2
Show the Multi-function display
Press the [NEXT] button repeatedly until "SRS
WOW" appears.
Refer to <Notes on Multi-function System> (page
9).
3
Enter WOW Control mode
Turn the [VOL] knob to select "SRS WOW".
Press the [VOL] knob.
• When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "SRS WOW".
4
Select the WOW Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item
"Effect"
"FOCUS"
"TB-F"
"TB-R"*
"SRS 3D"
• * You can control this item when Speaker Select Rear
of <Sound Management system> (page 13) is set to
any item other than "None".
5
Adjust the WOW control item
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
WOW Control Item
Effect
FOCUS
TruBass Front
TruBass Rear
SRS 3D
WOW Control Item Range
Effect
FOCUS
TruBass Front
TruBass Rear
SRS 3D
• Effect: TruBass, FOCUS and SRS 3D are all set to values
shown in the table below.
Effect TruBass FOCUS
High 4 8
Middle 3 6
Low 2 3
• FOCUS: Adjusts the vertical position of the front
speaker and sound image by virtual
adjustment.
• TruBass: Assists the playback for the super bass sound.
• SRS 3D: Makes a natural 3D sound field.
• You cannot set SRS 3D in tuner source.
6
Exit WOW Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
• To get the best sound, first set the Speaker select.
Middle/High/User/Through/Low
OFF/1 — 9
OFF/1 — 4
OFF/1 — 4
OFF/1 — 4
SRS 3D
4
2
1
15
|
English