Switching Display; Station/Disc Naming (Snps/Dnps) - Kenwood KDC-MPV622H3 Instruction Manual

General features

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Station name
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc name
Clock
In MP3 source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Disc name
Clock
Display
"SNPS"
"BAND+FREQ"
Display
"D-TITLE"
"T-TITLE"
"P-Time"
"DNPS"
Display
"TITLE"
"ALBUM"
"FOLDER NAME"
"FILE NAME"
"P-Time"
"DNPS"
— 12 —
In Auxiliary input source
Information
Auxiliary input name
Clock
If the Disc title, Track title, Song title & Artist name, or Album name
& Artist name is selected when the disc which does not have Disc
title, Track title, Song title, Album name, or Artist name is played,
track number and play time are displayed.

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• Refer to the <Switching Display> (page 12) and select either
"DNPS" or "SNPS".
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character position
Press the [4] or [¢] button.
4
Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)