Terms And Conditions; Default Recording Quality; Cd Recording; Language - Elan VIA! dj User Manual

E L A N H O M E S Y S T E M S

TERMS AND CONDITIONS

Displays the terms and conditions of the XIVA Customer
Service Agreement.
• Press Cont. to return to the Settings menu.

DEFAULT RECORDING QUALITY

Allows you to specify the recording quality used when you
record music using the Auto record option:
For each quality setting the screen shows the number of hours
of recording time available at that setting.

CD RECORDING

Allows you to configure options for recording from a CD:
The Recording Speed setting allows you to reduce the speed
at which audio is extracted from the CD during the recording
process. When the Reject Damaged Tracks option is set to off
(factory default) the maximum recording speed will be
increased, however damaged compact discs may produce
errors in the recording. Any changes to these settings will take
effect the next time a CD is recorded.

LANGUAGE

Allows you to select the language for the TV user interface—
languages available are English, French, German, Italian, and
Spanish.
SYSTEM INFORMATION
Shows the serial number, production date, and software
version number of your VIA!dj. You may need to quote these if
you contact ELAN for technical support.
© ELAN Home Systems 2004 • All rights reserved. 09/04

SYSTEM SETTINGS

Provides a series of menus to allow you to change the
hardware configuration on your VIA!dj:
The table in the next column summarizes the settings
available on each of the System Settings menus:
OPTION
Internet Access Specifies whether your VIA!dj
connects to the Internet via the
built-in modem or using the Ethernet
port.
Modem Settings Allows you to specify the following
settings when connecting via the
built-in modem: number of connec-
tion retries, the Assigned IP address
and the Sever IP address, the
modem initialization string, and
whether to use tone or pulse dialing.
Ethernet Settings Allows you to specify the following
settings when connecting via the
Ethernet port: IP address mode, IP
address, IP Mask, Gateway, IP
DNS1, IP DNS2.
Controller Settings Specifies the communication speed
for the Controller port on the rear of
the unit.
Video Settings Specifies whether the unit is config-
ured for NTSC or PAL use.
Remote Diagnostics Select this option if instructed to set
up your modem to receive incoming
calls from ELAN technical support
staff.

DEDICATED REMOTE CONTROL USE IN A

MULTIROOM SYSTEM

In rooms that have TVs with VIA!dj graphics available, but do
not have VIA! Touch Panels, you may wish to have a dedicated
VIA!dj remote control for that specific room. Your VIA!dj remote
control can be configured so that every button press indicates
to the VIA!dj which output is to be controlled. This means that
whenever infra-red is received by the VIA!dj the VIA! Touch
Panel and/or TV display will automatically switch to controlling
the appropriate output.
USER GUIDE REV D
DESCRIPTION
Page 25