Elan VIA! dj User Manual page 15

E L A N H O M E S Y S T E M S
TO USE THE ALPHANUMERIC KEYPAD
As part of the registration process you will need to enter your
name, address and other information into the VIA!dj. As alpha-
numeric data cannot be entered from the VIA! Touch Panel, you
will need to do this using the following keys on the remote
control:
ACTION
Enter text
Switch between upper-case Press CAPS on the remote or
Enter a space
Delete a mistake
Move the cursor within the text Press the LEFT or RIGHT
Enter numbers
Alternatively, you can use the built-in alphanumeric grid to
enter details. All numbers must be entered in this fashion:
•
Press the key to move the cursor onto the grid, then
< >
^
use the , , , and
and the key to select them.
•
^
Use the key repeatedly to move the cursor back into
the text entry box to return to normal text entry mode.
When you have completed each entry:
•
Press the Next action key on the front panel or the
button on the remote.
When you have entered your name and address details you will
be prompted to enter your country:
© ELAN Home Systems 2004 • All rights reserved. 09/04
HOW
Use the alpha-numeric keys on
the remote.
and lower-case letters
front panel to toggle between
upper and lower case.
Press the 0 key.
Press the DELETE key on the
remote.
ARROW keys.
Use the alpha-numeric grid.
keys to highlight characters,
^
• Press the and
press Select on either the VIA! Touch Panel, VIA!dj
front panel or remote control.
TO CONNECT YOUR VIA!DJ TO
THE INTERNET
The next sequence of screens helps you connect your VIA!dj to
the Internet.
• Press Cont. to begin.
The following screen then allows you to select from a range of
options to set up your internet connection:
^
• Press the and
following options:
1. Use Ethernet.
Use this option to connect to a high speed, broadband
internet service via the Ethernet port.
Note: You will require additional networking hardware
for this type of connection. Contact your dealer for
further information.
Note: AOL and CompuServe accounts are not cur-
rently supported.
2. Use Modem– the built-in account.
Your VIA!dj will connect using a pre-installed internet
account for your country.
Note: The built-in Internet account may not be
available for your country.
3. Use Modem - your own account.
If you are already using a computer to connect to the
Internet via a telephone line, and you have an existing
Internet account, you may prefer to use these account
details for your VIA!dj. If you do not know your username,
password, and Internet account telephone number you
may be able to read these from your computer's settings;
otherwise contact your Internet Service Provider for
assistance.
4. Do not connect.
You should use this option if you do not presently have
access to a telephone line (you may set up a connection
later).
• Press Select to select the option you have chosen.
USER GUIDE REV D
keys to highlight your country and
keys to select between the
Page 13