Fantec MWiD25 Manual page 19

3. Click on the "Next" button. The next step is to configure the WiFi Disk.
• SSID: Type-in the combination of letters and numbers only. 32 characters
is the maximum supported SSID length.
• Channel: The default setting is set to Auto. There are 14 available
channels to choose from.
• Modes: The default setting is 11b/g/n. You can also manually set the
modes to 11Mbps (802.11b), 54MBPS (802.11g), and 150Mbps (802.11n).
• Security: The default setting is NONE. WPA-PSK, WPA2-PSK , Mixed
WPA/WPA2-PSK are available.
• Password for WPA-PSK , WPA2-PSK , Mixed WPA-PSK/WPA2-PSK:
Minimum 8, Maximum 63 characters.
• IP Address: The default IP address is set to 10.10.10.254 with subnet
mask of 255.255.255.0. The IP address can be changed.
4. Click on the "Next" button. The next step is to change the admin default password.
Click on the "Next" button once the password has been modified. You may click on
the "Skip" button to keep the default password.
18