Stealth Cam STC-G42NG Instruction Manual page 15

CAMERA P ROGRAMMING -­‐ C USTOM ( CONT)
§ PIR D ELAY – 0 0min 0 5sec ( default): T his s etting i s u sed t o d etermine t he l ength o f t he
time that the camera will wait before it reinitializes its PIR sensor for the next
activation. With the TL mode this setting is only active if TL Delay is set to 1 min or
greater. This setting can be changed between the numbers of 00min 05sec to 59min
59sec. With this option blinking, use of the UP and DOWN arrows will allow the
minutes setting to be changed from 00 to 59. Once this setting is on the appropriate
minutes, press the RIGHT arrow key to move to the seconds setting and it will start to
blink. Use of the UP and Down arrows will allow the seconds setting to be changed
( 05 t o 5 9 i f m inutes = 0 0)
from 0 5 t o 5 9
TL DELAY – 00min 30sec (default): This setting is used to set a delay between TIME
•
LAPSE images. This setting can be changed between the numbers of 00min 05sec to
59min 5 9sec. W ith t his o ption b linking, u se o f t he U P a nd D OWN a rrows w ill a llow t he
minutes setting to be changed from 00 to 59. Once this setting is on the appropriate
minutes, press the RIGHT arrow key to move to the seconds setting and it will start to
blink. Use of the UP and Down arrows will allow the seconds setting to be changed
from 00 to 59 (05 to 59 if minutes = 00). If the TL Delay is greater than or equal to 1
min, t hen t he P IR s ensor w ill b e a ctive b etween t ime-­‐lapse p hotos.
TL S TART – 0 6:00PM ( default): T his s etting i s u sed t o g ive t he c amera t he s tart t ime f or
•
when to start the time-­‐lapse photography. The default format is in a HH/MM/AP
setup, s hould t he t ime f ormat b e i n 2 4 h our t he f ormat i t
will show HH/MM. With the HH (hour) setting blinking, use the UP and DOWN arrows
to allow the setting to be changed from 1 to 12. Once this setting is on
appropriate hour,
and i t w ill s tart t o b link.
www.stealthcam.com P age
877-­‐269-­‐8490
.
press the RIGHT arrow key to move to the MM (minute) setting
the
15