Operation - HP 460A Operating Manual

~ MODEL NO.
46A-16B
DESCRIPT ON
Patch Cord - Same as No. 46A-16A
except six feet in length.
46A-95A Panel Jack - Special low capacita.nce
panel jack designed for ZOO ohm cable.
Mates with Nos. 46A-16A and 46A-16B
Patch Cords or No. 46A-95B Cable Plug.
Requires 1-1/8 inch diameter mounting
hole.
46A-95B Cable Plug - Low capacitance plug de-
signed for use with ZOO ohm cable o Mates
with No. 46A-95A Panel Jack and with No.
46A-95E Connector Sleeve.
8lZ-5Z
Cable Special ZOO ohm cable available
in lengths to meet customer req"Girements.
The input circuit of the Model 460A is a terminated transmission
line with a characteristic impedance of ZOO ohms.
The output circuit has an impedance of Z80 ohms (resistive)o The
load impedance determines the gain of the amplifiero Therefore,
it is not necessary to match the load to the output of the amplifier
unless the gain is adversely affected. Shown below are two dia-
grams for connecting a matched or unmatched load to the Model
460A using a ZOO ohm cable.
I-'
N
-
- .D
-
1 1l
11l
Adapter for connection to 5XP CRTo
50 Ohm Adaptor - Provides a
cyp~
N con-
nection for coupling a 50 ohm transmission
line to the input of a Model 460A
amp_i£ier~
Includes a terminating resistor.
Connector Sleeve - Provides for joining
two No o 46A-95B C3.ble Plugs in order to
interconnect two lengths of ZOO ohm cable o
Adaptor for Model 410A/B Voltmeter
Probe - Consists of
a
bayonet type sleeve
with which a Model 410A/B Probe may
be directly connected to the output of a
Model 460A Amplifier o Includes the
proper compensating LC components.
46A-95F
46A-95E
46A-95C
46A-95D
OPERATION 1-4
-Z -