Removing The Cover; Figure 2-1: Front View Of Fwa-3180; Figure 2-2: Removing The Cover - Advantech FWA-3180 Series User Manual

Setting up your FW-3180 requires only a screwdriver and a small amount of time.
Before you begin, you should also gather together all of the device you plan to install,
as well as the CPU, RAM, HDD, and etc.
The front panel of FWA-3180 includes a LCD display module, eight LAN ports, a
RS-232 console port, and two LEDs where one is power LED and another is HDD LED.
On the rear panel, there is a power switch located on the top right hand corner.
Power switch Power switch
LCD display module LCD display module

2.1 Removing the cover

There are screws which secure the cover to the chassis. They are along the sides,
near the top. Remove them, and then slide the cover to the rear of the chassis.
RS-232 RS-232
Console Console
port port

Figure 2-1: Front view of FWA-3180

Figure 2-2: Removing the cover

FWA-3180 User Manual --- Page
Eight LAN Eight LAN
ports ports
7