Setting The Recordable Time; Recording Music Cd - Kenwood eXcelon KDC-X991 Instruction Manual

⁄
• Resume is canceled if "CANCEL" or "NO" is selected.
- "CANCEL": Press the Control knob.
- "NO": Select "NO" using the Control knob. Press the
Control knob.
• The resume function may be disabled depending the
condition of the vehicle or battery. The audio file may be
lost if the resume function is disabled.
Record or copy while the engine is running.
When music CD is inserted

Setting the recordable time

Set the recordable time for recording music CD.
1
Enter Mode setting
Using the Control knob, select "IMPORT CD" >
"MODE SET".
For the operation method, refer to <Function
Control mode> (page 11).
2
Set the recordable time
Turn the Control knob.
Display Setting
"Standard" Standard recording
"Long Play"
"Super Long Play" Extended time recording Approx. 16 hours
3
Exit Mode setting
Press the Control knob.
⁄
• * The maximum recordable time is obtained when there
is no other file. The actual recording time depends on
the song.
• The sound quality for Extended recording is lower than
for Standard recording.
36
|
English

Recording music CD

Music CD can be compressed and stored in internal
memory.
1
2
Max. recording time*
3
Approx. 8 hours
Approx. 12 hours
4
5
6
7
(
CD
⁄
• Read <About Internal Memory> (page 35) before
starting copy.
• Music CD can be recorded only from the internal CD.
Recording is performed at x1 speed.
Insert a CD-DA
Insert the music CD to record.
Refer to <Playing CD & Audio file> (page 30).
Change to import mode
Using the Control knob, select "IMPORT CD" >
"IMPORT".
For the operation method, refer to <Function
Control mode> (page 11).
Select record mode
Push the Control knob towards right or left.
Multiple song record mode is set when the control
knob is turned right and single song record mode
is set when it is turned left.
Select the song to record
Turn the Control knob or push it towards up or
down.
Record mode Operation
Single song Selects a single song.
Multi song Selects all songs or from specified song to
the last song.
Confirm the song
Press the Control knob.
Name the target file or folder
Using the Control knob, select "NAME SET ".
Recording starts if "SKIP" is selected.
Enter Name set mode
Press the Control knob.
)
Int Mem
CD000_001
CD001
CD001_003
CD001_010