Receiving the digital audio
signal of the TV
(Audio Return Channel)
The system can receive the digital audio signal
of the TV via an HDMI cable when your TV is
compatible with the Audio Return Channel
function. You can enjoy TV sound via the
system by using just one HDMI cable. For
details, see [Audio Return Channel] (page 58).
Operating the system via the
(Remote Easy Control)
You can control the basic functions of the
system via the TV remote when the system's
video output is displayed on the TV screen. For
details, refer to the operating instructions of the
Changing the language for the
on-screen display of the TV
When you change the language for the on-screen
display of the TV, the system's on-screen
display language is also changed after turning
the system off and on.
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
• The system outputs a loud test sound when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
The home menu appears on the TV screen.
Press C/c to select
Press X/x to select [Audio Settings],
Press X/x to select [Auto Calibration],
The confirmation display for [Auto
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
E C M
Press X/x to select [OK].
To cancel, select [Cancel].
-A C 2