Make sure to use the same screws to
secure the wireless transmitter.
Rear of the unit
• Do not use other screws to fasten the wireless
To insert the wireless
transceiver into the S-AIR sub
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
• When you change the S-AIR configuration, Sony
recommends that you perform [Auto Calibration].
For details, see "Calibrating the Appropriate Settings
Automatically" (page 49).
Setting the S-AIR ID to activate
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can activate wireless
To set the ID of the unit
Press "/1 on the unit.
The system turns on.
The home menu appears on the TV screen.
Press C/c to select
Press X/x to select [System Settings],
Press X/x to select [S-AIR Settings],
E W T 00
The [S-AIR Settings] display appears.
Press X/x to select [ID], then press
Press X/x to select the desired ID.
You can select any ID (A, B, or C).
The setting is made.
Set the S-AIR sub unit to the same ID.
Wireless transmission is activated as
To set the ID of the surround
Refer to the operating instructions of the
To set the ID of the S-AIR
Refer to the operating instructions of the S-AIR
To enjoy a 7.1 channel system
You can enjoy the more realistic surround sound
effect of 7.1 channels when you use the Wireless
Surround Speaker Kit (WAHT-SBP2, optional).
For details, refer to the operating instructions of
the Wireless Surround Speaker Kit.
In this case, set [Surround Back] in [Speaker
Settings] to [Yes] (page 50).