Connecting The Headset - Gigaset E49h User Manual

First steps
Display in idle status
Once the phone is registered and the time set, the idle display is shown as in this
example.
Displays
¼
Eco Mode + activated (
½
Eco Mode activated (
Charge status of the batteries:
= e V U (flat to full)
= flashes: batteries almost flat
INT 1 Internal name of the handset
If Eco Mode + (
strength of the radio contact between the base station and the handset:
Good to poor: Ð i Ñ Ò
u
No reception: | flashes
u
Your phone is now ready for use!

Connecting the headset

12
¢
page 25)
¢
page 25)
¢
page 25) is not activated, the top left of the display shows the
After removing the rubber cover, you can
connect a headset to the underside of your
telephone with the 2.5 mm jack connector.
See the relevant product page at
www.gigaset.com for information on
recommended headsets.
After using the headset, always replace the
rubber cover.
¼ ½ V
INT 1
01.10.09 07:15
INT SMS