Sound Controls; Sq (Sound Quality); Audio Modes (Bass/Treble/Balance/Fader) - Panasonic PP104286 Operating Instructions Manual

Sound Controls

SQ (Sound Quality)

SQ is a function that can call up various sound types at the touch
of button in accordance with your listening music type.
Hold down [SQ] for more than 2 seconds to select the sound
type as follows:
SQ indicator

Audio modes (Bass/Treble/Balance/Fader)

1
Push [SEL] (Select) to select the
audio mode in sequence.
(Setting Range: 0 to 40, default: 18)
(Setting Range: –12 dB to +12 dB by
2 dB, default: 0 dB)
(Setting Range: –12 dB to +12 dB by
2 dB, default: 0 dB)
(Setting Range: 15 levels each and 0
(center), default: CNT)
(Setting Range: 15 levels each and 0
(center), default: CNT)
(FLAT) flat frequency response:
does not emphasize any part.
(default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
2
Turn [VOL] (Volume) clockwise or counter-
clockwise to change each level.
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
Note: If no operation takes place for more than 5
seconds in audio mode (2 seconds in volume mode),
the display returns to the regular mode.
q: Up
w: Down
q: Increased
w: Decreased
q: Increased
w: Decreased
q: Right enhanced
w: Left enhanced
q: Front enhanced
w: Rear enhanced
11