Storage; Moving About; Ride And Handling - Mercury M48 GT Owner's Handbook Manual

F Attention
When conducting maintenance of your vehicle, turn the scooter off at the ignition and remove the
charger cords
& Suggestion
•
Use a damp cloth or a duster with a non-abrasive polish to clean the scooter. When cleaning the
scooter, do not splash water directly on it as this could lead to malfunction.
•
Do not use petrol, solvents or vaporizing solution as these may deform or damage the shrouds.
•
Do not use wax.

7.4 STORAGE

Ensure the vehicle is stored with the seat set in the forward position and the ignition is switched off.
& Suggestion
Store the scooter in a location where it is away from direct sunlight, rain or damp. When storing for a
long period of time, charge the battery fully and then disconnect the battery terminals. Contact your
dealer for more details.

7.5 MOVING ABOUT

•
Before moving, switch the scooter off at the ignition.
•
Lift the scooter by the chassis and not by the bumpers or the shroud, as this could cause damage or
injury.
•
You will need 2 or 3 people to lift or move the vehicle. It is recommended that you remove the
batteries before lifting the vehicle.

7.6 RIDE AND HANDLING

•
The M48 GT comes with all round adjustable suspension. The suspension can be adjusted for a firm
ride for better handling, or a soft ride for user comfort. For more information about adjusting this,
contact your dealer.
Wheeltech M48 GT electric scooter
Owner's Handbook
Part Code: Z40962-00
Page 18 of 18