Operation; Control Panel; Ignition Switch; Forward, Reverse And Braking - Mercury M48 GT Owner's Handbook Manual

4.1 CONTROL PANEL

1. Wigwag paddle
2. Head light switch
3. 4mph / 8mph switch
4. Battery gauge
4.2 HOW TO OPERATE YOUR SCOOTER

• Ignition Switch

• The ignition switch is operated by the key supplied, and is located on the right hand side of the
tiller below the front indicator lamp.
• To switch the scooter on, insert the key and turn 90° clockwise
• To switch the scooter off, turn the key 90° anticlockwise and remove (note that the key cannot be
removed whilst the scooter is switched on.

• Forward, Reverse and Braking

• Push the wigwag paddle forwards with your right thumb and the vehicle will move forward.
• Push the wigwag paddle forwards with your left thumb and the vehicle will move backward.
• The horn will sound when the vehicle is reversing.
• Release the wigwag paddle freely while moving, and the electromagnetic brake in the motor will
be activated. The rear brake lights will also illuminate when the electromagnetic brake is operating.
• The controls can be reversed for left-handed people or those who do not have full use of their right
arm. Please enquire with your dealer about this setting.
• Manual Brake
As well as an electromagnetic brake, the M48 GT has a manual cable brake. Squeeze the brake le ver
to apply the brake then release the lever to release the brake.
• Speed Dial
• The position of this dial determines the maximum attainable speed of the scooter.
• Turn the dial clockwise to increase the maximum speed, or turn the dial anticlockwise to reduce
the maximum speed attainable.
Wheeltech M48 GT electric scooter
Owner's Handbook

4. OPERATION

5. Speed dial
6. Indicator switch
7. Hazard light switch
8. Horn
1 2 3 4 5 6 7 8
Part Code: Z40962-00
Page 9 of 9