IFB Neptune Dx Instruction Manual page 6

Note 1: If you will only make pre-washing, start the machine
pressing the start/ stop key after pressing the pre-wash key while
the program is at the cancel position.
½
6.) Half Load Button
Using the function ½ , three sorts of washing up can be done
those being lower basket, upper basket and both baskets.
If you have little amount of dishes in your machine and
if you have to wash them, you can also activate the
semi-filling function
additionally. If you have dishes in both baskets, press
the key ½ and select the position in which both lamps are
highlighted.
If you have dishes only in the upper basket, pres the
key ½ and select the position in which the upper lamp
is illuminated. Thus, washing up shall be done only on
the upper basket of your machine. No dishes should
certainly be available in the lower basket while using this feature.
If you have dishes only in the lower basket, press the
key ½ and select the position in which the lower lamp
is illuminated. Thus, washing up shall be done only on
the lower basket of your machine. In using this feature,
make sure that there are no dishes in the upper basket.
Note 2: If you have used an extra feature on the latest washing
program, this feature will remain active also on the next washing
program. If you do not want to use this feature on the newly
selected washing program, press the selected feature button
again, and check that the lamp on the button goes off.
7.) Start/Pause Button
Once you press the Start/Pause button, the programme you
selected with the programme selector button will start running and
the status indicator lamp "wash" will light up.In the stop condition
while wash led is On, Start/Pause led will blink.
in some of the programs
8.) Programme selector knob
With the programme selector knob, you can select a suitable
programme for your dishes.
9.) Salt Lack Warning Indicator
In order to see whether softening salt in your machine is sufficient
or not, check salt lack warning lamp on the display. When salt
lack warning lamp starts coming on, you need to fill in the salt
chamber.
Rinse Aid Lack Warning Indicator
In order to check that there is sufficient rinse aid in your machine,
check rinse aid lack warning lamp on the display. When rinse aid
lack warning lamp starts coming on, fill in rinse aid chamber.
Note 3: During washing or when 3 in 1 detergent is used, salt and
rinse aid lack warning indicator lamps will go off even if there is
not sufficient salt and rinse aid in the machine.
10.) Program Monitor Lights
Program flow can be monitored via program monitor lights on
control panel.
Wash
•
Rinse
•
Dry
•
End
•
Child Lock Operation
In order to activate child lock, press "+" and "–" buttons on
Remaining time indicator simultaneously for 4 seconds. At this
time, "CL" appears for 2 seconds on remaining time indicator.To
inactive child lock, press "+" and "–" buttons again simultaneously
for 4 seconds. "CL" will blink for 2 times.