Switching On The Machine And Selecting A Programme; Switching On The Machine; Programme Follow-Up; Changing A Programme - IFB Neptune Dx Instruction Manual

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

The lamp on Program Start/Pause key
goes off once the Program starts and
the washing lamp is highlighted.
Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
As long as washing continues, the lights
of washing, rinsing and drying are on
respectively. Machine remains silent for
about 40-50 minutes when the drying
lamp is on.

Changing a programme

If you would like to change programs while a washing program is continuing.
Press once the Power
Start/Pause key.
Heavy soiled
1/2
Energy saver
Crockery
3 in 1 Prewash Half-Load Start / Pause
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
Once the program is over, the
lamp Finished is illuminated.
After the program stops, select
your desired program via the
Program selection button.
Crystal / Glass
1/2
Pots / Pans
3 in 1 Prewash Half-Load Start / Pause
Do not open the cover before
the lamp Finished is on.
Heavy soiled
Crystal / Glass
Energy saver Pots / Pans
Crockery
25
1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selection
button.
3. If you prefer or wish to prefer,
you can choose additional
function.
4 Start the program pressing
the Power Start/Pause key.
The new program started
will resume the course of
the old program.
Start the program you have
newly selected by pressing
again the Start/Pause key.
Heavy soiled
1/2
Energy saver
Crockery
3 in 1 Prewash Half-Load Start / Pause
Crystal / Glass
Pots / Pans