Hensel Integra Mini 300 User Manual page 9

Generators, compact flash units, and flash heads
ATTENTION!
Defective flash tubes and false handling can pose a mortal
danger.
A damaged flash tube can mean mortal danger because you
could come in contact with the electrodes conducting high vol-
tage. Therefore, never touch unprotected electrodes inside the
flash tube!
Before replacing the flash tube or modeling light, the unit must
be switched off and disconnected from the power supply. Even
when the unit is disconnected from the power supply, in case of
a malfunction the condensers could still be highly charged. This
means touching the device could pose a life-threatening danger.
Halogen lamps and flash tubes can burst which is why they must
only be used with properly mounted safety cover.
ATTENTION!
Contact with capacitor voltage can pose a mortal danger.
Repairs or opening the housing must only be done by an autho-
rized customer service provider.
Working with the device
HENSEL-VISIT International GmbH
• Do not flash directly into someone's eyes from a short dis-
tance since this can lead to eye damage.
• Do not look directly into the flash tube or the reflector. The
flash could be triggered accidentally.
• Ventilate rooms regularly and sufficiently when using flash
units to prevent accumulation of high ozone levels which
may be caused by the operation of strong flash units.
• Cover devices not in use with a proper dust guard when
working in dusty environments.
User manual Integra Mini 300
7