Insert Flash Tube; Inserting Halogen Lamp For Modeling Light - Hensel Integra Mini 300 User Manual

User manual Integra Mini 300
Disassemble
Note:
Protective glass covers are available in different types. They can
change the color temperature as well as the light characteristics!

Insert flash tube

Compact flash units and the majority of flash units have plug-in
flash tubes which you can replace yourself. Please make sure
and observe all safety precautions.
Replacing the flash tube is described in detail in the chapter on
maintenance; see „Replacement of flash tube" on page 20.

Inserting halogen lamp for modeling light

The halogen lamp for the modeling light is plug-in style. Ob-
serve the following instructions when inserting the enclosed
halogen lamp:
Note:
Avoid handling the lamp with your bare hands to prevent con-
taminating the glass of the lamp with the oil of your skin. This
would reduce the operational life of the lamp. Please use cotton
gloves.
Make sure you do not damage the flash tube when inser-
ting it.
12
 Tilt the protective glass cover slightly until it releases from
the first and then the second spring.
 Remove the protective glass cover by gently pulling it
straight out of the last spring.
 Place the pins in the lamp socket and carefully push down,
alternating the pressure on both pins until engaging the
arrester of the lamp socket.
HENSEL-VISIT International GmbH