Table of Contents
Advertisement
Interface
Connects to your local area network by Ethernet cable.
LAN LED (green color)
RJ45 LAN
This LED will be flashing while network accessing via Ethernet.
socket
Power LED (orange color)
This LED is used to indicate whether DC power is on or not.
DC power input, connect to AC power adapter.
DC-in Jack
Note
RS-485: Connect to a local keyboard controller.
DI/ DO: Connect to sensor in and alarm out devices.
Cable for I/O connectors:
Name
12VDC
RS-485 &
DI
Digital I/O
GND
DO
485+
485-
MIC in
Connect a microphone to the network camera.
(Audio in)
Connect a loud speaker to the network camera. This function is
Audio out
for voice alerting and two-way audio.
The Network Camera also provides composite video output.
The video output function is only for easy installation to check
Video out
view angle and focus. The output is not a Mega-Pixel resolution.
(BNC
Furthermore, only "720P Mode" supports this function. "2 Mega
connector)
Mode" does not support it. Please refer to Setting \ Video \
Common chapter.
8
Description
To ensure maximum compatibility, use only the power
adapter that came with your product. Otherwise, the
product may be damaged.
Number
1
DC 12V (50mA maximum)
2
Digital signal input
3
GND
4
Digital signal output
5
RS485 data +
6
RS485 data -
Function
Hide quick links:
Advertisement
Table of Contents
