Kenwood KVT-516 Instruction Manual page 53

Cyrillic alphabet search screen
5
2
2
5 Displays the Phonebook beginning with
the name whose first character you have
touched.
3 Select the name to call
6
7
7
6 Phonebook data list.
"REC" turns on for data with voice for voice
recognition already registered.
7 Scrolls the Phonebook data list.
8 Scrolls the name.
9 Registers the voice for voice recognition to
the selected Phonebook. If there are already
35 voice tag registered in the same cell-
phone, [Record] button is deactivated.
See <Voice Registration> (page 57).
p Plays the voice registered in the selected
Phonebook data.
q Deletes the voice registered in the selected
Phonebook data.
Touch to display the confirmation screen.
Touch [YES] to delete or [NO] to cancel.
w Displays the detail of the selected
Phonebook data.
e Returns to the Hands-Free Control screen.
4 Select the phone number to call
14
15
r Calls the selected phone number.
t Creates an SMS for the displayed phone
y Scrolls the phone number.
u Displays the Phonebook data list.
i Returns to the Hands-Free Control screen.
3
5 Make a call
⁄
• To use the Phonebook, it must have been downloaded
9
8
from the cell-phone. For more details, see the instruction
10
manual of your Bluetooth Unit and your cell-phone.
11
• Initials including no corresponding name will not be
12
displayed.
• During search, a non-accent character such as "u" is
13
searched for instead of an accent character such as "ü".
16
17
18
number.
See <SMS (Short Message Service)> (page
60).
English 53