Speaker Setup - Kenwood DDX8036BT Instruction Manual

Speaker Setup

Speaker Setup
You can select a speaker type and its size
to get the best sound effects.
1 Display the Speaker Select screen
> >
Touch [ ] [
> >
[Speaker Select]. (page 67)
2 Select a speaker you wish to adjust
When the speaker type and size are
set, the speaker crossover network and
equalizer curve are set automatically.
1 1 1
2 2 2
3 3 3
4 4 4
1 Center speaker (DDX8 series)
2 Front speaker
3 Rear speaker
4 Subwoofer
[Tweeter] You can set the tweeter when
you are selecting front speakers.
If you are using a tweeter together with
the front speakers, set the tweeter to
"ON". In the "ON" position, the Equalizer
is adjusted to its best position.
[X'over] Displays the Speaker Crossover
Setup screen.
You can adjust the crossover setup
that was set automatically when you
selected the speaker type.
3 Select a speaker type
You can select any of the following
speaker types.
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM
> >
] [Audio SETUP]
"Center" None, 40x70 mm, 5 cm, 10 cm,
13 cm, 16 cm over
"Front" OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" None, OEM, 10 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" None, 16 cm, 20 cm, 25
cm, 30 cm, 38 cm over
⁄
• Select "None" if you have no speakers.
• If you set the center speaker to "None" even in
a short time when you are setting the Surround
Control to "Bypass+Center", the Surround Control
is set to "Bypass" automatically. See <Surround
Control> (page 66).
• If you set the center and rear speakers to "None"
when you are setting the Surround Control
to "Dolby PL II", the Surround Control is set to
"Bypass" automatically. See <Surround Control>
(page 66).
Crossover Network Setup
You can set a crossover frequency of
speakers.
1 Select the speaker to set the
crossover
1 1 1
2 2 2
3 3 3
4 4 4
1 Sets the High Pass Filter of the center
speaker. (DDX8 series)
2 Sets the High Pass Filter of the front
speaker.
3 Sets the High Pass Filter of the rear
speaker.
4 Sets the Low Pass Filter of the
subwoofer.
Next page 3 Next page 3
English 83