Dta Setup; Crossover Network Setup; Speaker Setup Memory - Kenwood KVT-925DVD Instruction Manual

Setup Menu

DTA Setup

Manually set the sound output timing of each
channel.
1 Display the DTA Setup screen
DTA
(P50 6)
DTA Setup screen
DTA DTA DTA DTA D
1
F F F F ro Fro ron Fro ront
10cm 1 1 0c 10c
2
Preset
Return
1 Selects a speaker to be adjusted.
2 Sets a delay time of the selected speaker.
3 Stores the adjusted status in memory or calls it
from memory.
4 Returns to the Car Type Set Up screen.
2 Select a speaker you wish to adjust
1
2 2
3
3
4
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
54 English
3 Set a delay time
The speakers are virtually moved to the desired
distance.
When the values of center speaker and front
speakers increase, they are virtually moved forward.
When the values of rear speakers and subwoofer
increase, they are virtually moved backward.
Store or call your setup into/from memory
To store your setup in memory
2
3
Preset
4
Continue to touch more than 2 seconds.
To call your setup from memory
Preset
You can also call the setup from memory by touching
7 on the Car Type Set Up screen.
Preset

Crossover Network Setup

You can manually set a crossover frequency of
speakers.
X'Over
(P51 w)
LPF
100Hz 1kHz
Frequency y
1 Phase Normal 4
1
Slope
2 18dB/Oct 2
3
Return
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type from the
Speaker Setup screen, the crossover
frequency setup is erased.
• During crossover setup, the speaker type is set
to "USER" on the Speaker Set Up screen.

Speaker Setup Memory

You can store all of speaker and crossover
setup in memory simultaneously.
To store your setup in memory
(P51 q)
Preset
Continue to touch more than 2 seconds.
To call your setup from memory
Preset (P51 q)
English 55