Cisco TelePresence System EX60 installation guide 78-19809-03 EX60 Installation Guide | April 2012 | © 2010-2012 Cisco Systems, Inc. All rights reserved.
AC adapter and power cable • Ethernet cable User documentation User guides and compliance and safety information for this product are available at the Cisco web site: http://www.cisco.com/go/ex-docs Unpacking the touch screen and cables Lift the rectangular box out of the package.
Lay the package flat on the floor. Pull the EX60, surrounded by foam protection, out of the package. Carefully loosen the foam protection. Lift the EX60 and place it on a firm surface. Weight: 7 kg / 15 lb EX60...
Optional: Mounting the handset Tool: Screwdriver Hold the touch screen and the handset Fasten the two units together. The screws base in an upright position. are pre–mounted in the handset base. Move the two units together. Make sure the Use the screwdriver and fasten the screws at the connector on the handset base slides into the handset base from the underneath.
System overview and basic setup Remove the cover to get access to the connectors at the rear side. You may connect an external microphone and a headset to your system (not provided). Kensington Headset lock Micro- Connect the touch screen, phone LAN and power as illustrated.
PC to the second RJ45 cable for optimal PC image quality. socket of the EX60 (labelled with a PC symbol). Your PC and the EX60 will then share the LAN The cables are in the rectangular box, see connection.