AWA MHDV2262-O4 User Manual page 16

5). Signal Information: Displays the signal information in DTV (digital TV) mode only.
6). Software Update:
WARNING: Do not attempt to use this option unless you have a valid software program for the
MHDV2262-O4 TV stored on a compatible USB drive, and the drive is connected to the TV. Please remove
the antenna cable from the TV RF port, go to the channel Menu, select Software Update (USB) and press
OK to run the software update.
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.You can adjust picture effects here, such as contrast,
brightness, etc.
Press to move, press OK to adjust.
NOTE:
1).Tint is available in NTSC system only.
2).There are four color temperature modes that can be selected: medium, warm, cool, user.
3).The Screen o p t i o n is only available once the Input Source is set to PC , which allows you to adjust
Horizontal position, vertical position, size and phase or select an Auto Adjust mode.
3.SOUND MENU
The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as treble, bass, balance etc.
Press to move, press OK to adjust.
Note:
Auto volume: only available when the input signal volume is too large or there is distortion.
4.TIME MENU
The fourth item of the menu is the TIME MENU. You can adjust the clock, power on/off time, sleep time etc
Press to move, press OK to adjust.
NOTE:
The clock time is automatically set by the Digital TV transmissions.
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
<
PICTURE
Screen
Picture Mode Standard Color Temperature
Contrast 50
Brightness 50
Green 50
Color 50
Sharpness 50
Tint 50
MENU
Sound Mode Standard
Balance
Auto Volume
<
SOUND
Clock -- --
Off Time
On Time
Sleep Timer
<
TIME
Auto Sleep
Time Zone
-15-
"
>
Medium
Red 50
Blue 30
MENU
" "
>
-- --
>
OPERATION
"