Operation - AWA MHDV2262-O4 User Manual

Installation Guide
Please select an OSD Language
Cesky English Magyar
Fran ais
~
Espanol
Dansk Hrvatski Nederlands
Deutsch E ka Italiano Norsk
OK
This screen only appears when the TV is turned on for the first time, or reset to factory settings. You can
choose language, country and auto tuning programs. After tuning, the screen will skip to the first DTV program.
To select the MENU mode, press the menu button on the side keyboard of the TV, or press the TV/menu button
on the remote control.
1.CHANNEL MENU
The first item of the MENU is channel menu (for ATV or DTV source only). ATV = Analogue TV, DTV = Digital TV.
You can search channels and edit programs here.
1).Auto Tuning:
Search all the channels automatically (you can select ATV, DTV, or DTV+ATV searching).
Press to select search type, then press
button to start auto tuning.
NOTE:
All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is set to DTV+ATV.
Any previously stored channels will be deleted after auto tuning is carried out.
After auto tuning, the receiver will skip to the first DTV channel.
The radio channels are the ones provided by some TV stations. This unit does not receive
DAB+Digital Radio broadcasts.
Polski
Australia Bulgaria
Portugues Austria Croatia
Pycck Belgium Czech
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
<
CHANNEL
Signal Information
Software Update(OAD)Off
Software Update(USB)
Tune Type DTV+ATV
Bulgaria
Australia Denmark
Austria Croatia Finland
Belgium
Czech France
MENU
to select country (eg. Australia), then press the OK
Channel Tuning
TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
96% UHF CH 68 DTV
-13-

OPERATION

Country
Denmark Germany Italy
Finland Greece Luxembourg
France Hungary Netherlands
OK
>