Teeth Replacement - U-Line H-1027 User Manual

teetH replaceMent

1. Loosen screws and nut with an 8 mm wrench and
4 mm Allen wrench. (See Figure 13)
2. Remove the magazine assembly. (See Figure 14)
Figure 13
Figure 15
PAGE 7 OF 11
operatIng InstrUctIons contInUed
3. Loosen screws with 3 mm Allen wrench.
(See Figure 15)
4. Change teeth one at a time to prevent reverse
teeth.
Figure 14
0513 IH-1027