Advertisement
Quick Links
π
H-2019
MANUAL STAPLE GUN
COMPATIBLE STAPLES
1/4"
3/8"
S-14135
S-17852
TO LOAD
1.
Remove pusher rod (A) from machine. (See Figure 1)
2. Insert strip of staples.
3. Replace pusher rod (A). (See Figure 1)
TO CLEAN STAPLE CHANNEL
1.
Remove pusher rod (A). (See Figure 2)
2. Remove screw and nut from hole (B). (See Figure 2)
3. Pull down entire inside frame for complete cleaning.
(See Figure 2)
TO DETERMINE STAPLE SHORTAGE FOR REFILL
1.
Press latch to release pusher rod.
2. Lightly push rod forward until it stops. Visible
projected part of rod indicates amount of staples
remaining in track. (See Figure 3)
PAGE 1 OF 2
1-800-295-5510
uline.com
1/2"
S-17853
LOADING
A
Figure 2
Figure 1
B
A
Figure 3
0714 IH-2019
Advertisement
Related Manuals for U-Line H-2019
Summary of Contents for U-Line H-2019
- Page 1 π H-2019 1-800-295-5510 uline.com MANUAL STAPLE GUN COMPATIBLE STAPLES 1/4" 3/8" 1/2" S-14135 S-17852 S-17853 LOADING TO LOAD Figure 1 Remove pusher rod (A) from machine. (See Figure 1) 2. Insert strip of staples. 3. Replace pusher rod (A). (See Figure 1) TO CLEAN STAPLE CHANNEL Remove pusher rod (A).
- Page 2 STAPLING HOW TO DETERMINE PROPER STAPLE LEG SIZE STAPLE PENETRATION To choose the proper staple leg length for a job, there For best penetration with the manual staple gun, raise are two factors to consider: the rear of the gun slightly off the work and bear down on the front end to prevent recoil when operating.