Chapter 4 Operating Basics; Switching Power On/Off; Adjusting Volume; Selecting A Band - Kenwood TM-D700 E Instruction Manual

SWITCHING POWER ON/OFF

1 Switch ON the DC power supply.
• If operating mobile, skip this step.
2 Press the PWR switch to switch ON the transceiver.
3 To switch OFF the transceiver, press the PWR switch
again.
4 If operating as a fixed station, switch OFF the DC
power supply.
• You may skip step 3. After switching ON the transceiver,
you can switch it OFF or ON using only the power switch
on the DC power supply.
OPERATING BASICS

ADJUSTING VOLUME

Turn the VOL control clockwise to increase the audio
level and counterclockwise to decrease the audio level.
• If background noise is inaudible because of the Squelch
function, press the Mic PF key assigned the Monitor
function {page 62}, then adjust the VOL control. Press the
PF key again to cancel the Monitor function.

SELECTING A BAND

Press the left [BAND SEL] to select band A, or the right
[BAND SEL] to select band B.
• "PTT" moves to the selected band.
• For band A and B, see page 17.
4
19