Battery Charging - Motorola MotoRazr V3 User Manual

battery charging

New batteries
are not fully
charged. Plug
the travel
charger into the
mini-USB port on
your phone as
shown. Plug the
other end into an electrical outlet. Your phone
might take several seconds to start charging
the battery. The display shows Charge Complete
when finished.
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
Note: You can charge your battery
by connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
essentials 13