Table of Contents
Advertisement
III. FIREPLACE INSERT INSTALLATION
1. STOVE COMPONENTS
A) Model 36-BW Stove
B) Adhesive Backed Insulation
C) Top Trim Panel (1)
D) Side Trim Panels (2)
E) Firebrick Firebox Liner
F) Assembly Screws
G) Ash Pan
H) Blower Assembly
2. PREPARATION
To facilitate the installation of your Model 36-BW
stove:
A) Clear the area around the fireplace of furniture,
rugs, etc.
B) Place drop clothes or other protective materials
on the floor and hearth to protect against damage.
C) Remove ashes and clean the firebox floor.
D) Remove the damper plate, if possible, or block it
open using non-combustible materials, such as brick
or rock.
E) Insert the interior of the firebox and flue for
possible deterioration of mortar joints, loose bricks,
and excessive creosote buildup.
F) Make sure ash dump is closed and sealed.
NOTE: Clean flue BEFORE installing stove.
FIGURE 4
FIREPLACE UNIT STOVE COMPONENTS
Dimension (Minimum)
A
24 1/2"
B
C
36"
20"
FIGURE 5
5
Hide quick links:
Advertisement
Table of Contents
