Set Up a Wireless Network
You can set up a wireless network manually:
The wireless LAN on your SBG3500-N Series is enabled by default. To add a
wireless client to the network, use the settings found on the bottom panel of
your SBG3500-N Series, which will look similar to the following example:
SSID: ZyXEL0A561
WPA2-PSK: FB373BD35636BC45
Configure wireless devices that you want to connect to the wireless network to
use the same wireless settings as the SBG3500-N Series.
The default wireless settings vary for each SBG3500-N Series. Refer to the
bottom panel of your device and use the provided information.
The Web Configurator
The Web Configurator is a web browser tool that allows you to configure the
Device. Your computer and the Device need to be in the same IP address range
to use this tool.
1. Open your browser and enter http://192.168.1.1 (the Device's default IP
address) as the address.
9