TANDBERG Remote Control User Manual page 19

you will see a black screen the next time. Press the Presentation button to
turn Presentation off.
 Make sure that the far end participants are also set to Main Camera.
 Check to make sure the cables are properly connected between your
system and your camera
 Press the Selfview button to test if your camera is working
Problem
 The picture is out of focus, too bright, or too dark.
Solution
 Press the ZOOM button on the remote control – this will trigger the auto
focus function
 You can adjust settings for a too bright or too dark picture by going to Main
Menu—Camera Control—Picture Control. It is best to leave these set to
Auto Adjust.
 Control the light in the room with curtains or overhead lights. Bright
window light will confuse the camera, so shut curtains if possible.
Problem
 The system does not automatically activate when you pick up the remote
control
Solution
 Make sure the screen and the codec are switched on and have electricity
 Make sure all of the cables are properly connected from the codec to the
camera
 Check the batteries in the remote control
 Make sure the green light on the front of the camera is on
If you are still having technical difficulties, please contact your library system's
IT department immediately.
18