TANDBERG TRC 4 Quick Reference Manual

Mic off turns your
microphone on and off.
Volume + and – adjusts
the system volume.
Press OK to open the
menu. Use Arrow keys to
navigate. When the menu is
closed, use Arrow keys to
move the camera.*
Press Cancel to close the
main menu or go one step
back in submenus.
Press and hold
Press and hold to close all
menus.
Change layout on the screen.
Press again to change to
other layouts.
Press Call to place a call.
Use Phone Book to call
stored contacts.
Send snapshot (only in a call).
Press OK when done.
Use this key in combination with
the Number keys to access
camera (position) presets.
Use this key to display the
Services menu.
Video Sources selection. Choose
Mic off
between Main Cam, PC, Doc Cam,
DVD and AUX. Press again to deselect.
Volume
OK and
arrow keys
Cancel
Layout
Call
Phone
Snapshot
Book
Star button
* Not available on all video systems
Press and hold
Press and hold
Press and hold
Press and hold
Press and hold
Camera Presets
Press and hold
Touch tones
Switch to PC (default).*
Press again to switch back
Presentation
to main camera.
Open the Presentation
menu to select other
sources.
Press Zoom + or – to zoom
Zoom
the camera in and out.
Press Selfview to see your
Zoom
outgoing image. Press again
Selfview
to turn Selfview off.
Press End Call to end an
Zoom
End Call
Selfview
ongoing call. Outside a call,
press this key to go to standby.
Use the Number keys to
dial. When in a call, select
Number keys Zoom
End Call
Selfview
Camera Presets with the
number keys.
Press and hold a number to
store a preset.
Use the Pound key to enter
touch tone (DTMF) mode when
Pound key
in a call. Press OK when done.
Press and hold Number keys
Zoom End Call
Selfview
and A/a key
A/a: When entering text,
change between upper case
Press and hold and lower case letters.
Press and hold to go between
character and numeric modes.
Press to gain access to the
far end controls.
Press to display the on-line
Help.
D14896.01 Oct. 2011