Page 1
E.164 number or an IP address). Just start entering the number when the VCU is out of standby Microphone mode Remember to place the attached conference microphone (above) close to all local participants Figure 1 - Tandberg remote control functions Page 1 v1.1r...
Page 2
Quick Guide to using the Tandberg remote Starting a call Choose an entry via the Phonebook button, then press 'Confirm' or the green 'Call' button to start the call. If entering an IP address using the numeric keypad, type the first digits in numeric (123) mode, then switch to alpha (abc) mode by pressing the first Function key along the top of the remote and press 1 to enter the full stop.