Assigning Categories To A Saved Location; Navigation - BMW Motorrad Navigator V Owner's Manual

• Select Phone Number.
• Select Categories to assign categories to the saved
location.
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7
Edit the information.
8
Select Done.

Assigning Categories to a Saved Location

You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after
you have saved at least 12 locations.
1
Select Where To? > Saved.
2
Select a location.
3
Select .
4 Select > Edit > Categories.
5
Enter one or more category names, separated by commas.
6
If necessary, select a suggested category.
7
Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2
Select > Delete Saved Places.
3
Select the box next to the saved locations to delete, and
select Delete.
Saving a Home Location
You can set your home location for the location you return to
most often.
1
Select Where To? >
2
Select Enter My Address, Use Current Location, or
Recently Found.
The location is saved as "Home" in the Saved menu.
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
1 Select Where To? > Saved > Home.
2
Select .
3
Select > Edit.
4
Enter your changes.
5
Select Done.
Finding Recently Found Destinations
Your device stores the last 50 destinations you have found.
1
Select Where To? > Recent.
2
Select a location.
Clearing the List of Recently Found Locations
Select Where To? > Recent >

Navigation

Starting a Route
1
Search for a location.
2
Select a location.
3
Select Go!.
Previewing Multiple Routes
1 Search for a location.
2
From the search results, select a location.
Navigation
> Set Home Location.
> Clear > Yes.
3 Select Routes.
4
Select a route.
Changing the Route Calculation Mode
1
Select Settings > Navigation > Calculation Mode.
2
Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
• Select Off Road to calculate point-to-point routes (without
roads).
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation.
2
Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Taking a Route Using Curvy Roads
Your device can calculate routes that prefer curvy roads. This
feature can provide a more enjoyable ride, but it may increase
the time or distance to your destination.
NOTE: This feature is not available on all device models. This
feature is dependent on your map region.
1
Select Settings > Navigation > Calculation Mode > Curvy
Roads > Save.
2
Select Settings > Navigation > Avoidances > Highways to
avoid highways on your route (optional).
This can increase the use of curvy roads in routes but may
add substantial time or distance for longer routes.
3
Start a route.
Starting a Route to a Saved Location
1
Select Where To? > Saved.
2
If necessary, select a category, or select All Saved Places.
3 Select a location.
4
Select Go!.
Your Route on the Map
The speed limit feature is for information only and does not
replace your responsibility to abide by all posted speed limit
signs and to use safe driving judgment at all times. Garmin will
not be responsible for any traffic fines or citations you receive
for failing to follow all applicable traffic laws and signs.
The route is marked with a magenta line. A checkered flag
marks your destination.
As you travel, the device guides you to the destination with
voice prompts (when the device is in the automotive mount or
connected to a Bluetooth headset), arrows on the map, and
directions at the top of the map. Depending on recalculation
settings, if you depart from the original route, the device
recalculates the route and provides new directions.
A data field displaying the current speed limit may appear as
you travel on major roadways.
Using the Navigation Map
1 Select View Map.
2
Select anywhere on the map.
3
Select an option:
• To zoom in or out, select
NOTICE
or .
5