Switching Seek Mode; Switching Display - Kenwood KTC-SR903 Instruction Manual

Switching Seek Mode

Sets the seeking mode.
See the <Menu System> page of the Instruction Manual of
your control unit, and select the seek mode menu item.
The seek mode is switched each time the [4] or [¢]
button is pressed.
Display Operation
"AUTO1" Search in order of the channels in the Preset
memory.
"MANUAL" Normal manual seeking control.

Switching Display

When you are listening to the Sirius satellite radio, you can
switch over the display information as follows.
For operations, see the <Switching Display> page of the
instruction manual of your control unit.
What is displayed may partly depend on control units to be
connected.
<C models, KDC-X917, KDC-X817, KDC-9017, KDC-X717>
Information (Upper Part Display)
Channel Number & Channel Name
Song Title & Artist Name
Category Name
ESN
Channel Number
Information (Lower Part Display)
Channel Number & Channel Name
Song Title & Artist Name
You cannot apply the same setting to Upper Part and Lower Part.
<KDC-V7017, KDC-716S, KRC-535, KRC-435, KDC-519,
KDC-X459, KDC-419, KDC-5019, KDC-4019, KDC-319>
Information
Channel Number & Channel Name /
Channel Name
Song Title & Artist Name
Category Name
ESN
Channel Number
— 11 —