Using The Docks - PSC Falcon 4220 Product Reference Manual

Figure C-2. Compact Flash Type II Memory Card
You will no longer be able to use the handstrap with a CF type peripheral requiring an
open cover.

Using the Docks

Refer to the Falcon 4220 Quick Reference Guide and the Falcon 4220 Dock
Instruction Sheet for more information on the Falcon 4220 Single- and Quad-
Slot docks.
Product Reference Guide
Open Slot
(no opening)
1. Remove the handstrap plate or the handle accessory if there is one on the
PDA. Refer to "Installing the Handstrap" on page
Accessory Installation Instructions included on the product CD for
more information.
2. Remove the screws from the CF cover by using a small Phillips head
screwdriver. Remove the CF cover plate.
3. Insert a CF card, making sure it is correctly oriented. Do not force it.
Refer to
Figure C-2C
4. Replace the CF cover.
• For most CF cards, use the closed top cover. Using this cover main-
tains the IP54 Industrial seal rating. Refer to
• For CF modules with external antennas, etc., use the CF cover with
the open slot at the top. Refer to
CF Card
a
Sealed Unit
b c
.
Figure C-2A
Using the Docks
CF Card
and the Handle
C-5
.
Figure C-2B
.
C-3