Scanner Settings - PSC Falcon 4220 Product Reference Manual

Configuring a PDA

Scanner Settings

To change the
Figure 3-2. Scanner Configuration Settings
A
Table 3-1. Scanner Configuration Menu and Basic Tab
Basic
3-10
Scanner Settings
1. Go to
Start > Programs > Scanner > Quick ScanSet
scanning application. The only indicator that the program is open is the
bar code
System Tray
2. Select/tap the bar code icon in the
on the left in Figure
• Select
Settings
• You can modify the settings either from the menu (Figure
selecting
Setting > Basic
.
Table 3-1
Section
Field Name
(Menu Item)
Beep
Trigger Timeout
(sec.)
and bar code symbologies, complete as follows:
icon.
System Tray
.
3-2A
to open the
Scanner Configure
B
Tap the Quick
ScanSet Icon
to modify the
applet settings.
tab (Figure
3-2B
Tap/enable this checkbox to receive beep tone
when scanning, or select from the menu.
Select a trigger timeout duration (in seconds) from
this pull-down list.
to open the bar code
to open the menu shown
applet.
). Complete as described in
Function/Operation
®
Falcon 4220 Windows
) or by
3-2A
®
CE PDA